3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 1.575 Inch | 40 Millimeter CONSOLIDATED BEARING NJ-2218E M Cylindrical Roller Bearings
3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 1.575 Inch | 40 Millimeter CONSOLIDATED BEARING NJ-2218E M Cylindrical Roller Bearings NACHI BEARINGS OF AMERICA CORP. 3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 1.575 Inch | 40 Millimeter Manufacturers , Online Wholesale Suppliers !
What is NJ-2218E M bearing interchange？
| Brand Name: |
CONSOLIDATED BEARING |
| Model Number: |
NJ-2218E M |
| Shaft Seal Type: |
76.0 LB |
| Displacement Cover End (cu in/revolution): |
Flange Mount |
| Model No.: |
Left Hand (CCW) |
| Port Orientation - Shaft End: |
3525VQ25A21-11DD20-LH |
| Pump Series: |
3 |
| Shaft End RPM [Max: |
Flange |
| Port Orientation - Cover End: |
N/A |
| GPM @ 1,800 rpm, Cover End: |
Standard Pilot |
Product Details
| Shaft Seal Type |
76.0 LB |
| Displacement Cover End (cu in/revolution) |
Flange Mount |
| Model No. |
Left Hand (CCW) |
| Port Orientation - Shaft End |
3525VQ25A21-11DD20-LH |
| Pump Series |
3 |
| Shaft End RPM [Max |
Flange |
| Port Orientation - Cover End |
N/A |
| GPM @ 1,800 rpm, Cover End |
Standard Pilot |
| Minor Diameter [Min |
1.25 in |
| Seal Material |
14 Tooth Splined |
| Integral Valve Configuration |
3525VQ |
| Mounting Flange |
1.9375 in |
| Max. RPM [Max |
Buna-N |
| Spline Description |
2500 |
| Weight |
1.04 in |
| Minor Diameter [Max |
SAE C, 2 Bolt |
| Pressure Port Size, Shaft End |
Single Shaft Seal |
| Port Type |
12/24 |
| Pressure Port Size, Cover End |
2500 |
| Shaft Dia. |
2500 |
| Mounting |
N/A |
| Pilot Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Type |
1.248 in |
| Rotation |
1.247 in |
| Minor Diameter |
N/A |
| Shaft Key |
N/A |
| Cover End Flow @ RPM |
N/A |
| Shaft End Pressure [Max |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
3525VQ25A21-11DD20-LH |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Relief Valve Setting |
3000 |
| Cover End RPM [Max |
31.5 |
| Major Diameter [Min |
37.5 |
| Cover End Pressure [Max |
w/o Integral Valves |
| Displacement Shaft End (cu in/revolution) |
Outlet 135° CW from Inlet |
| Port Size |
Outlet 90° CW from Inlet |
| Controlled Flow Rate |
1 in Flange |
| Shaft End Flow @ RPM |
1 1/4 in Flange |
| Shaft Length |
4.12 |
| Major Diameter [Max |
4.98 |