2.165 Inch | 55 Millimeter x 3.937 Inch | 100 Millimeter x 0.827 Inch | 21 Millimeter CONSOLIDATED BEARING NJ-211 M C/3 Cylindrical Roller Bearings
Question2.165 Inch | 55 Millimeter x 3.937 Inch | 100 Millimeter x 0.827 Inch | 21 Millimeter CONSOLIDATED BEARING NJ-211 M C/3 Cylindrical Roller Bearings 2.165 Inch | 55 Millimeter x 3.937 Inch | 100 Millimeter x 0.827 Inch | 21 Millimeter ? Find what you need faster by entering your CONSOLIDATED BEARING NACHI BEARINGS OF AMERICA CORP. information .
What is NJ-211 M C/3 bearing interchange?
Brand Name: |
CONSOLIDATED BEARING |
Model Number: |
NJ-211 M C/3 |
Major Diameter [Max: |
76.0 LB |
Cover End Pressure [Max: |
Flange Mount |
Pilot Type: |
Right Hand (CW) |
GPM @ 1,800 rpm, Cover End: |
3525V30A17-86BB22R |
Relief Valve Setting: |
3 |
Spline Description: |
Flange |
Pressure Port Size, Shaft End: |
5/16 in |
Shaft Dia.: |
Standard Pilot |
Product Details
Major Diameter [Max |
76.0 LB |
Cover End Pressure [Max |
Flange Mount |
Pilot Type |
Right Hand (CW) |
GPM @ 1,800 rpm, Cover End |
3525V30A17-86BB22R |
Relief Valve Setting |
3 |
Spline Description |
Flange |
Pressure Port Size, Shaft End |
5/16 in |
Shaft Dia. |
Standard Pilot |
Cover End RPM [Max |
1.375 in |
Pressure Port Size, Cover End |
Straight w/ Key |
Minor Diameter |
3525V |
Displacement Cover End (cu in/revolution) |
3.875 in |
Seal Material |
Buna-N |
Minor Diameter [Max |
1800 |
Shaft Length |
N/A |
Port Orientation - Shaft End |
SAE C, 2 Bolt |
Major Diameter [Min |
Single Shaft Seal |
Integral Valve Configuration |
N/A |
Minor Diameter [Min |
1800 |
Port Type |
1800 |
Shaft End Flow @ RPM |
N/A |
Shaft End RPM [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Model No. |
N/A |
Port Size |
N/A |
GPM @ 1,800 rpm, Shaft End |
N/A |
Mounting |
N/A |
Shaft Key |
N/A |
Max. RPM [Max |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Shaft Type |
3525V30A17-86BB22R |
Cover End Flow @ RPM |
2500 |
Shaft End Pressure [Max |
2500 |
Weight |
25.5 |
Manufacturer Part No. |
45 |
Displacement Shaft End (cu in/revolution) |
N/A |
Controlled Flow Rate |
Outlet 45° CCW from Inlet |
Shaft Seal Type |
Outlet 90° CCW from Inlet |
Mounting Flange |
1 in Code 61 |
Rotation |
1 1/4 in Code 61 |
Pump Series |
3.4 |
Port Orientation - Cover End |
5.9 |