1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter CONSOLIDATED BEARING 5208-ZZN Angular Contact Ball Bearings
Find the discount 1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter CONSOLIDATED BEARING 5208-ZZN Angular Contact Ball Bearings online you need NACHI BEARINGS OF AMERICA CORP. . 1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter We offer ... If you check out our large selection of 1.575 Inch | 40 Millimeter x 3.15 Inch | 80 Millimeter x 1.189 Inch | 30.2 Millimeter CONSOLIDATED BEARING 5208-ZZN Angular Contact Ball Bearings Available Volume Discount once .
What is 5208-ZZN bearing interchange？
| Brand Name: |
CONSOLIDATED BEARING |
| Model Number: |
5208-ZZN |
| Mounting: |
5/16 in |
| Port Type: |
N/A |
| Model No.: |
Piston Pumps |
| Cover End Flow @ RPM: |
PVH |
| Shaft Seal Type: |
80.0 LB |
| Manufacturer Part No.: |
Right Hand (CW) |
| Seal Material: |
Flange |
| Pressure Port Size, Shaft End: |
Variable Displacement Open Circuit |
Product Details
| Mounting |
5/16 in |
| Port Type |
N/A |
| Model No. |
Piston Pumps |
| Cover End Flow @ RPM |
PVH |
| Shaft Seal Type |
80.0 LB |
| Manufacturer Part No. |
Right Hand (CW) |
| Seal Material |
Flange |
| Pressure Port Size, Shaft End |
Variable Displacement Open Circuit |
| Port Orientation - Cover End |
#8 SAE O-Ring Port - Bottom (Top Plugged) |
| Pressure Port Size, Cover End |
2 in 4-Bolt Flange/Code 61 |
| Controlled Flow Rate |
1.25 in |
| Cover End RPM [Max |
Straight w/ Key |
| Major Diameter [Max |
26 gpm @ 1800 rpm |
| Relief Valve Setting |
1 in 4-Bolt Flange/Code 61 |
| Minor Diameter |
Pressure Compensator |
| Pilot Type |
1.89 in |
| Cover End Pressure [Max |
Side Port |
| Shaft End Pressure [Max |
Viton |
| GPM @ 1,800 rpm, Shaft End |
None |
| Integral Valve Configuration |
26 |
| GPM @ 1,800 rpm, Cover End |
SAE C, 4 Bolt |
| Max. RPM [Max |
Q250 Valve Plate, No Case To Inlet Check Valve |
| Minor Diameter [Max |
1 1/4 w/5/16 Key |
| Displacement Shaft End (cu in/revolution) |
No Auxiliary Mounting Features |
| Spline Description |
3.5 |
| Port Size |
None |
| Shaft Key |
None |
| Pump Series |
3625 |
| Major Diameter [Min |
957-1,073 psi |
| Shaft Type |
Standard Displacement |