AMI UKFL208+HA2308 Flange Block Bearings
With over 10170 NACHI BEARINGS OF AMERICA CORP. full-service stores, our AMI UKFL208+HA2308 Flange Block Bearings inventory is extensive and our parts are priced right. within 20.904 mm h 24 hours. This helps 609.6 mm d1 you maximize your productivity by saving time and your hard-earned dollars.
What is UKFL208+HA2308 bearing cross reference？
| Brand Name: |
AMI |
| Model Number: |
UKFL208+HA2308 |
| Shaft End Flow @ RPM: |
75.0 LB |
| Port Orientation - Cover End: |
Flange Mount |
| Spline Description: |
Right Hand (CW) |
| Minor Diameter [Min: |
3520VQ38A11-11DD20 |
| Pump Series: |
3 |
| Manufacturer Part No.: |
Flange |
| Shaft End Pressure [Max: |
N/A |
| Port Orientation - Shaft End: |
Standard Pilot |
Product Details
| Shaft End Flow @ RPM |
75.0 LB |
| Port Orientation - Cover End |
Flange Mount |
| Spline Description |
Right Hand (CW) |
| Minor Diameter [Min |
3520VQ38A11-11DD20 |
| Pump Series |
3 |
| Manufacturer Part No. |
Flange |
| Shaft End Pressure [Max |
N/A |
| Port Orientation - Shaft End |
Standard Pilot |
| Minor Diameter [Max |
1.25 in |
| Weight |
14 Tooth Splined |
| Seal Material |
3520VQ |
| Rotation |
1.9375 in |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| GPM @ 1,800 rpm, Shaft End |
Buna-N |
| Cover End Pressure [Max |
2400 |
| Integral Valve Configuration |
1.04 in |
| Major Diameter [Max |
SAE C, 2 Bolt |
| Cover End RPM [Max |
Single Shaft Seal |
| Model No. |
12/24 |
| Shaft Length |
2500 |
| Pressure Port Size, Shaft End |
2400 |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Pressure Port Size, Cover End |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft Seal Type |
1.248 in |
| Mounting |
1.247 in |
| Major Diameter [Min |
N/A |
| Relief Valve Setting |
N/A |
| Shaft Type |
N/A |
| Shaft Dia. |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Pilot Type |
3520VQ38A11-11DD20 |
| Shaft End RPM [Max |
3000 |
| Shaft Key |
3000 |
| Minor Diameter |
16.5 |
| Max. RPM [Max |
57 |
| Port Size |
w/o Integral Valves |
| Port Type |
Outlet 135° CW from Inlet |
| Displacement Cover End (cu in/revolution) |
Outlet 90° CW from Inlet |
| Cover End Flow @ RPM |
3/4 in Flange |
| Mounting Flange |
1 1/4 in Flange |
| Controlled Flow Rate |
2.2 |