AMI UCFCF209-26 Flange Block Bearings
Browse AMI UCFCF209-26 Flange Block Bearings NACHI BEARINGS OF AMERICA CORP. 1.4 Calculation factor Y0 0.46 Calculation factor e Categories in the 306 mm Da max. Manufacturers Online Free. including AMI Bearing.
What is UCFCF209-26 bearing interchange？
| Brand Name: |
AMI |
| Model Number: |
UCFCF209-26 |
| Model No.: |
75.0 LB |
| Cover End RPM [Max: |
Flange Mount |
| Shaft Type: |
Left Hand (CCW) |
| Pilot Type: |
3520VQ30E11-11CC20-LH |
| Displacement Shaft End (cu in/revolution): |
3 |
| Port Orientation - Shaft End: |
Flange |
| Shaft Length: |
N/A |
| Major Diameter [Max: |
Standard Pilot |
Product Details
| Model No. |
75.0 LB |
| Cover End RPM [Max |
Flange Mount |
| Shaft Type |
Left Hand (CCW) |
| Pilot Type |
3520VQ30E11-11CC20-LH |
| Displacement Shaft End (cu in/revolution) |
3 |
| Port Orientation - Shaft End |
Flange |
| Shaft Length |
N/A |
| Major Diameter [Max |
Standard Pilot |
| Shaft End Pressure [Max |
1.25 in |
| Pressure Port Size, Cover End |
14 Tooth Splined |
| Cover End Pressure [Max |
3520VQ |
| Port Orientation - Cover End |
1 15/16 in |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Seal Material |
2500 |
| Minor Diameter [Max |
1.04 in |
| Max. RPM [Max |
SAE C, 2 Bolt |
| Cover End Flow @ RPM |
Single Shaft Seal |
| Pump Series |
12/24 |
| Integral Valve Configuration |
2500 |
| GPM @ 1,800 rpm, Shaft End |
2500 |
| Shaft Seal Type |
N/A |
| Shaft End Flow @ RPM |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Type |
1.248 in |
| Weight |
1.247 in |
| Port Size |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Relief Valve Setting |
N/A |
| Shaft End RPM [Max |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Mounting |
3520VQ30E11-11CC20-LH |
| Shaft Dia. |
3000 |
| Minor Diameter [Min |
3000 |
| Minor Diameter |
16.5 |
| Manufacturer Part No. |
45 |
| Major Diameter [Min |
w/o Integral Valves |
| Controlled Flow Rate |
Outlet 45° CW from Inlet |
| Mounting Flange |
Outlet Inline w/Inlet |
| Shaft Key |
1 1/16 in SAE O-Ring |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Rotation |
2.22 |
| Spline Description |
5.96 |