AMI CUCFL208-25CE Flange Block Bearings
With over 10170 full-service stores, 28 mm B1 our 38 mm d3 AMI CUCFL208-25CE Flange Block Bearings inventory is extensive and our parts are priced right. within M 20x1 G 24 hours. This helps you maximize your NACHI BEARINGS OF AMERICA CORP. productivity by saving time and your hard-earned dollars.
What is CUCFL208-25CE bearing cross reference？
| Brand Name: |
AMI |
| Model Number: |
CUCFL208-25CE |
| Port Type: |
76.0 LB |
| Shaft Key: |
Flange Mount |
| Cover End RPM [Max: |
Right Hand (CW) |
| Shaft Length: |
3525VQ35A21-1CC20 |
| Mounting Flange: |
3 |
| Shaft Seal Type: |
Flange |
| Weight: |
5/16 in |
| Model No.: |
Standard Pilot |
Product Details
| Port Type |
76.0 LB |
| Shaft Key |
Flange Mount |
| Cover End RPM [Max |
Right Hand (CW) |
| Shaft Length |
3525VQ35A21-1CC20 |
| Mounting Flange |
3 |
| Shaft Seal Type |
Flange |
| Weight |
5/16 in |
| Model No. |
Standard Pilot |
| Shaft End Pressure [Max |
1.25 in |
| Controlled Flow Rate |
Straight w/ Key |
| Minor Diameter [Max |
3525VQ |
| Port Orientation - Shaft End |
2.5 in |
| Shaft End Flow @ RPM |
Double |
| Minor Diameter |
Buna-N |
| Manufacturer Part No. |
2400 |
| Port Size |
N/A |
| Mounting |
SAE C, 2 Bolt |
| Cover End Flow @ RPM |
Single Shaft Seal |
| Integral Valve Configuration |
N/A |
| Cover End Pressure [Max |
2500 |
| Seal Material |
2400 |
| Pressure Port Size, Cover End |
N/A |
| Port Orientation - Cover End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Rotation |
N/A |
| Max. RPM [Max |
N/A |
| Pilot Type |
N/A |
| Relief Valve Setting |
N/A |
| Pressure Port Size, Shaft End |
N/A |
| Shaft Dia. |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
3525VQ35A21-1CC20 |
| Minor Diameter [Min |
3000 |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Displacement Cover End (cu in/revolution) |
31.5 |
| Spline Description |
52.5 |
| Shaft Type |
w/o Integral Valves |
| GPM @ 1,800 rpm, Cover End |
Outlet 45° CW from Inlet |
| Pump Series |
Outlet Inline w/Inlet |
| Shaft End RPM [Max |
1 in Flange |
| Displacement Shaft End (cu in/revolution) |
6.9 |
| Major Diameter [Min |
4.1 |