| Spline Description |
76.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Manufacturer Part No. |
Right Hand (CW) |
| Pressure Port Size, Cover End |
3525VQS30A21S-297DD21 |
| Shaft End RPM [Max |
3 |
| Integral Valve Configuration |
Flange |
| Relief Valve Setting |
N/A |
| Major Diameter [Max |
SAE J744 Pilot |
| Pilot Type |
1.25 in |
| Port Size |
14 Tooth Splined |
| Max. RPM [Max |
3525VQ |
| Shaft End Flow @ RPM |
1 11/16 in |
| Shaft Key |
Buna-N |
| Displacement Cover End (cu in/revolution) |
2500 |
| Shaft Type |
1.04 in |
| Displacement Shaft End (cu in/revolution) |
SAE C, 2 Bolt |
| Mounting |
Double Shaft Seal |
| Model No. |
12/24 |
| Pressure Port Size, Shaft End |
2500 |
| Mounting Flange |
2500 |
| Cover End RPM [Max |
N/A |
| Shaft End Pressure [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Length |
1.229 in |
| GPM @ 1,800 rpm, Cover End |
1.223 in |
| Minor Diameter [Min |
N/A |
| Port Orientation - Shaft End |
N/A |
| Seal Material |
N/A |
| Rotation |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Controlled Flow Rate |
3525VQS30A21S-297DD21 |
| Major Diameter [Min |
3000 |
| Port Orientation - Cover End |
3000 |
| Shaft Dia. |
31.5 |
| Weight |
45 |
| Minor Diameter [Max |
w/o Integral Valves |
| Minor Diameter |
Outlet 135° CW from Inlet |
| Pump Series |
Outlet 90° CW from Inlet |
| Cover End Flow @ RPM |
1 in Flange |
| Port Type |
1 1/4 in Flange |
| Shaft Seal Type |
4.12 |
| GPM @ 1,800 rpm, Shaft End |
5.96 |