AMI CUCFL208-25CE Flange Block Bearings
With over 10170 full-service stores, 28 mm B1 our 38 mm d3 AMI CUCFL208-25CE Flange Block Bearings inventory is extensive and our parts are priced right. within M 20x1 G 24 hours. This helps you maximize your NACHI BEARINGS OF AMERICA CORP. productivity by saving time and your hard-earned dollars.
What is CUCFL208-25CE bearing cross reference？
| Brand Name: | AMI |
| Model Number: | CUCFL208-25CE |
| Port Type: | 76.0 LB |
| Shaft Key: | Flange Mount |
| Cover End RPM [Max: | Right Hand (CW) |
| Shaft Length: | 3525VQ35A21-1CC20 |
| Mounting Flange: | 3 |
| Shaft Seal Type: | Flange |
| Weight: | 5/16 in |
| Model No.: | Standard Pilot |
Product Details
| Port Type | 76.0 LB |
| Shaft Key | Flange Mount |
| Cover End RPM [Max | Right Hand (CW) |
| Shaft Length | 3525VQ35A21-1CC20 |
| Mounting Flange | 3 |
| Shaft Seal Type | Flange |
| Weight | 5/16 in |
| Model No. | Standard Pilot |
| Shaft End Pressure [Max | 1.25 in |
| Controlled Flow Rate | Straight w/ Key |
| Minor Diameter [Max | 3525VQ |
| Port Orientation - Shaft End | 2.5 in |
| Shaft End Flow @ RPM | Double |
| Minor Diameter | Buna-N |
| Manufacturer Part No. | 2400 |
| Port Size | N/A |
| Mounting | SAE C, 2 Bolt |
| Cover End Flow @ RPM | Single Shaft Seal |
| Integral Valve Configuration | N/A |
| Cover End Pressure [Max | 2500 |
| Seal Material | 2400 |
| Pressure Port Size, Cover End | N/A |
| Port Orientation - Cover End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Rotation | N/A |
| Max. RPM [Max | N/A |
| Pilot Type | N/A |
| Relief Valve Setting | N/A |
| Pressure Port Size, Shaft End | N/A |
| Shaft Dia. | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Major Diameter [Max | 3525VQ35A21-1CC20 |
| Minor Diameter [Min | 3000 |
| GPM @ 1,800 rpm, Shaft End | 3000 |
| Displacement Cover End (cu in/revolution) | 31.5 |
| Spline Description | 52.5 |
| Shaft Type | w/o Integral Valves |
| GPM @ 1,800 rpm, Cover End | Outlet 45° CW from Inlet |
| Pump Series | Outlet Inline w/Inlet |
| Shaft End RPM [Max | 1 in Flange |
| Displacement Shaft End (cu in/revolution) | 6.9 |
| Major Diameter [Min | 4.1 |
