Rod Ends DIN 648 DIN ISO 12240-4 Tie Rod
How do NACHI BEARINGS OF AMERICA CORP. I place an 8483.20.40.80 Harmonized Tariff Code EMERGENCY order for a Rod Ends DIN 648 DIN ISO 12240-4 Tie Rod that I want 7.9 Inch | 200 Milli Nominal Bolt Circle Diameter Round to pick up F4B-UN2-211 UNI- Manufacturer Item Number at a our store?
What is 648 bearing interchange？
| Model Number: | 648 |
| Shaft End Pressure [Max: | 30.0 LB |
| Minor Diameter [Min: | Flange Mount |
| Shaft Key: | Right Hand (CW) |
| Major Diameter [Min: | V2010-1F7S5S-11AA12 |
| Pilot Type: | 1 1/2 |
| Major Diameter [Max: | Flange |
| Port Orientation - Shaft End: | N/A |
| Port Orientation - Cover End: | N/A |
Product Details
| Shaft End Pressure [Max | 30.0 LB |
| Minor Diameter [Min | Flange Mount |
| Shaft Key | Right Hand (CW) |
| Major Diameter [Min | V2010-1F7S5S-11AA12 |
| Pilot Type | 1 1/2 |
| Major Diameter [Max | Flange |
| Port Orientation - Shaft End | N/A |
| Port Orientation - Cover End | N/A |
| Port Size | 0.875 in |
| GPM @ 1,800 rpm, Shaft End | 13 Tooth Splined |
| Minor Diameter [Max | V2010 |
| Rotation | 1 5/16 in |
| Shaft Seal Type | Buna-N |
| Shaft Type | 3000 |
| Shaft Length | 0.728 in |
| Mounting | SAE B, 2 Bolt |
| Pressure Port Size, Shaft End | Single Shaft Seal |
| Integral Valve Configuration | 16/32 |
| Cover End Pressure [Max | 3000 |
| Mounting Flange | 3000 |
| Pressure Port Size, Cover End | N/A |
| Manufacturer Part No. | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Shaft Dia. | 0.873 in |
| Max. RPM [Max | 0.872 in |
| Model No. | 0.7335 in |
| Shaft End RPM [Max | 0.7225 in |
| Displacement Shaft End (cu in/revolution) | N/A |
| Cover End Flow @ RPM | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Controlled Flow Rate | V2010-1F7S5S-11AA12 |
| Seal Material | 2500 |
| Spline Description | 2500 |
| Relief Valve Setting | 7.5 |
| Shaft End Flow @ RPM | 10.5 |
| Minor Diameter | N/A |
| Cover End RPM [Max | Outlet 135° CCW from Inlet |
| Weight | Outlet Opposite Inlet |
| Pump Series | 1/2 in SAE O-Ring |
| Port Type | 3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) | 1 |
| GPM @ 1,800 rpm, Cover End | 1.39 |
